The FUJIFILM X-Pro2 takes X-Series camera performance to new heights. The new 24MP X-Trans CMOS III image sensor and high performance X Processor Pro image processing engine dramatically improve image quality. The Advanced Hybrid Viewfinder is capable of instantly switching between optical and electronic viewfinders. Fast focal plane shutter and intelligent Hybrid Phase detection take performance a step further. Plus, there’s a new weather resistant rugged body and dual SD memory card slots to fulfill the wishes of every pro photographer. By combining these features with the ultra-high image quality of FUJINON X-Mount lenses and FUJIFILM’s renowned colour reproduction technology, the X-Pro2 delivers the best ever results from an X-series camera.
- 24.3MP APS-C X-Trans CMOS III sensor reduces moiré and false colours to dramatically improve image quality
- High-performance X Processor Pro image processing engine increases response times, combined with the X-Trans CMOS III sensor, it achieves faster AF, lower noise and better colour reproduction
- Advanced Hybrid Multi Viewfinder featuring a Multi-Magnification function that automatically switches viewfinder magnification according to the lens and simultaneous EVF over OVF display
- Electronic shutter maximum speed of 1/32000 sec and a focal plane shutter with a top speed of 1/8000 sec. with flash synchronization of up to 1/250 sec.
- Intelligent Hybrid Phase detection AF with 273 selectable AF points
- Light weight (459g) weather resistant magnesium alloy chassis with improved control dials for use in rugged, outdoor conditions
- 3-inch 1.62 million dots resolution rear LCD
- Dual SD memory card slot with UHS-II (Slot 1) for fast, more reliable image storage
- High ISO sensitivity performance - ISO 200-12800 in RAW - improves the whole sensitivity range for smoother gradation and deeper blacks, vastly increasing low light shooting
- 16 Film simulation modes including the new ACROS monochrome mode
- New customizable menu system with a redesigned menu and new “My Menu” settings
- 14 Bit RAW with lossless compression and in camera processing
- TTL 256 Zone metering with multi spot average, spot and new centre weighted metering
- Wifi Remote shooting and Instax Share printer compatible
- Exposure compensation expanded to +/-5 stops
- Interval Shooting
- Full HD Video in 1080p 60/50/30/25/24
- 13 Creative filters - Including: Toy camera / Miniature / Pop color / High-key / Low-key / Dynamic tone / Soft focus / Partial color (Red / Orange / Yellow / Green / Blue / Purple)
- Includes Li-Ion Battery NP-126W with up to 350 images per charge
- Compatible with all Fujinon X-Mount lenses
The first model to feature a newly-developed sensor for outstanding image quality
The newly-developed 24.3MP X-Trans CMOS III APS-C sensor boasts the highest ever pixel count for an X-Series camera. Combined with an XF lens, it delivers images with a perceived resolution far greater than the number of pixels used. In addition, the phase detection pixels have been positioned over a larger area for a faster, more precise phase detection AF performance. High ISO sensitivity performance has also been improved to the point that the whole sensitivity range — up to the maximum ISO 12,800 (Extended output sensitivity up to 51,200) — can now be used with confidence.
New processing engine increases speed and image processing capabilities
Thanks to the newly-developed X-Processor Pro engine, processing speeds are now approximately four times faster than a conventional model. This maximizes the capabilities of the X-Trans CMOS III sensor to ensure it delivers the highest image quality with super-fast response times. In addition, thanks to the high-speed reading technology of the sensor, the conventional EVF's display speed of 54fps has been increased to a maximum of 85fps*. This substantially reduces the image delay phenomenon when tracking a moving subject. Blackout time after release has also been reduced by approximately half and compressed RAW is supported, improving the ease-of-handling of RAW data. The FUJIFILM X-Pro2 features a new CPU for high-speed processing. The Buffer memory has also been increased for an even faster response.
Using the knowledge gained from accurately reproducing color in film manufacturing, Film Simulation allows the user to change color and tone settings to match the subject, scene and creative intent, just as if shooting with a roll of film. There are a total of 15 modes including PROVIA / Standard, Velvia / Vivid and ASTIA / Soft.
The FUJIFILM X-Pro2 has the ability to reproduce graininess typically unique to film-based images. There are two strengths: Strong or Weak, which can be combined with each of the different Film Simulation modes. The effects are also possible through in-camera RAW development.
By using compressed RAW files, performance and functionality now meet the needs of professional photographers, including faster live view and even higher definition movies.
Compose images in the viewfinder using one of three different viewing options
Photographers love looking through a viewfinder to take photos, which is why X-Series models have used finders from the very start. Combining the advantages of both an OVF and an EVF, Fujifilm has perfected the Advanced Hybrid Multi Viewfinder with three viewing options. Now you can return to the roots of photography with the only viewfinder of its kind in the world.
Electronic Rangefinder (ERF) simultaneously displays a small EVF window in the optical viewfinder
The EVF is simultaneously displayed as a small window in the optical viewfinder. It can be displayed in three different ways: 100% field of view, 2.5x magnification and 6x magnification. This allows the user to check focus, the angle-of-view, exposure and white balance in real-time, even when taking photos through the OVF. As it can also be used with MF assist, precise MF is possible in the OVF mode.
Brand new interface
A new sophisticated design is used for the finder display. Screen information is now even easier to see.
Advanced optical viewfinder system
The optical design of the viewfinder has been improved, moving the eye point from 14mm on the previous model to 16mm. A diopter correction dial is also included, which makes the viewfinder even more comfortable to use.
Depth of Field Preview
The Depth of Field Scale can be selected for film reference display in addition to conventional pixel reference. With film reference, photo viewing from printing becomes a prerequisite for depth display, allowing the user to use it in a sense of depth of field similar to film photos.
Focusing system combines fast and accurate AF with simple MF
Accentuate your subject. For photographers, focusing is an important job. Although AF now reacts faster than the human eye, the appeal and level of trust in MF will never disappear. Manually operating the focus ring to pick out a specific element in the frame is often crucial. Speed isn't always everything.
Focus Lever allows you to instantly change the focus area
The new Focus Lever on the back of the camera can be moved like a joystick in eight directions to instantly move the focus area. Now, rapid focus area changes can be made, even when composing an image. Not only is this available to move the AF point during AF mode, but it can also be used during MF mode to quickly move the enlarged display area when using MF assist.
Color Digital Split Image
The FUJIFILM X-Pro2 comes equipped with different types of MF assist including Digital Split Image, which is reminiscent of old rangefinders, and Focus Peaking where color is used to show the parts of the image that are in focus. Color or monochrome can now be selected for Digital Split Image MF assist.
Phase Detection AF area expanded to 7x7
The number of selectable focusing points has been expanded from 49 on previous models to 77. Approximately 40% of the imaging area is now covered by fast, precise phase detection AF pixels, which means focusing speeds when photographing moving subjects have improved dramatically.
A body design that maximizes practicality
No photographer wants to take their eye from the viewfinder for fear of missing the perfect shot. With this in mind, key design aspects have been concentrated on the camera's right side. The major exposure settings are available on a dial for quick fingertip control. Changes can also be made while the camera is switched off, so users will always be ready for the next photo opportunity. Thanks to the simplicity of the FUJIFILM X-Pro2, you'll soon be creating masterpieces.
Exposure compensation dial in the C position
As it's used so frequently, exposure compensation has been made into a dual-purpose dial. Compensation up ±3 stops in 1/3 steps is possible even with the camera to your eye thanks to the dial's knurled shape. But if the C position is selected, exposure compensation of up to ±5 stops is possible using the front command dial.
One dial for both ISO and shutter speed
The shutter speed and ISO dials have now been combined into one dial, which is reminiscent of those found on old film cameras. Changing the ISO is done by lifting the outer portion of the dial. Now all exposure settings can be performed with dials.
For more comfortable handling
The FUJIFILM X-Pro2 features a new front command dial. It is used to set intermediate shutter speeds that are not available on the shutter speed dial when shooting in Manual or Shutter Speed Priority modes. It's also used to shift programmed exposure combinations when shooting in Program mode.
Highly customizable menus
A maximum of 16 frequently used items can be registered to the new My Menu feature. When combined with the 16 items from the Q Menu, a total of 32 shortcuts can be created.
Tough conditions are no longer to be feared. The FUJIFILM X-Pro2 can be relied upon to take a picture at any time in any conditions.
Reliability is one of the most important considerations when choosing a camera, so the FUJIFILM X-Pro2 needs to work at any moment, regardless of where you are and what type of scene you want to photograph. That's why the camera body is made from magnesium and features a dust-proof, splash-proof and freezeproof structure, along with a highly durable focal plane shutter and dual card slot.
Durable magnesium body
Coated in the same half-matte paint as the X-Pro1, the luxurious body of this new flagship model is made from highly robust magnesium alloy, which feels both solid and reliable in the hand. The dials are milled from aluminum and operate with a reassuring click. In addition, the FUJIFILM X-Pro2 has many prerequisites of a professional camera, including dust-resistance, water-resistance and the ability to work in low-temperatures thanks to the 61 weatherproof seals around the body. Shoot with confidence, no matter what the weather.
Dual SD Card Slots
The FUJIFILM X-Pro2 is the first mirrorless camera to offer dual SD card slots for highly reliable data storage. Slot 1 is compatible with UHS-II standards for excellent write speeds. One of three recording methods can be selected: sequential, backup and RAW / JPEG sorting.
Focal plane shutter with a maximum speed of 1/8000 sec.
The FUJIFILM X-Pro2 comes equipped with a focal plane shutter boasting a durability of 150,000 shots, a maximum speed of 1/8000 sec and a flash sync speed of 1/250sec. Furthermore, the camera also includes an electronic shutter with completely silent operation and a maximum speed of 1/32,000 sec, allowing users to select maximum apertures even in bright conditions.
Wide selection of Auto Bracketing functions
With a choice of 5 different auto bracketing functions (AE, ISO Sensitivity, Dynamic Range, Film Simulation and White Balance), you are ready to explore a whole world of photographic effects with just one press of the shutter.
In-camera RAW Converter
The built-in RAW data converter lets you view results in the field without first transferring the data to a PC. This easy-to-use feature not only takes into account exposure compensation, white balance and other in-camera image quality settings, but also lets you apply Film Simulation modes in the converter mode.
Focus with a Touch with the new smart application - FUJIFILM Camera Remote
With the new dedicated "FUJIFILM Camera Remote" application, you can focus and trigger the camera release from your smartphone or tablet. The app not only lets you adjust focus, but also control settings like shutter speed, aperture, exposure compensation and ISO sensitivity. You can even apply other settings like Film Simulation, self-timer, and flash while "Touch AF" lets you focus from your phone or tablet, too. Imagine all the situations where this smart assistant will come in handy! Take commemorative group photos with yourself in the shot, capture wildlife photos, or remotely release the shutter for night shots free from camera shake.The photographic possibilities are endless.
Share every moment via email and SNS with easy wireless transfer to your smartphone
For easy wireless transfer of photos to your smartphone or tablet just download the free dedicated "FUJIFILM Camera Remote" application to your device. There's no need to enter an ID, password or to change other troublesome settings; with just a touch of a button, you can transfer your high-quality images to your phone or tablet ready to upload to your blog or social networking site.
Automatically transfer and save photos on your PC via Wi-Fi®*
Just turn on your PC and select PC AutoSave from the camera's menu for effortless wireless transfer and saving of your photos and movies to your home PC.**
Frame rates can be selected from 60fps, 50fps, 30fps, 25fps and 24fps for Full HD movies, supporting worldwide motion picture formats. It is also possible to change the settings of aperture, shutter speed, and exposure compensation while shooting a movie. Just as with still images, program, aperture priority, shutter priority and manual modes can be selected, as well as film simulation modes. Various expressions can be enjoyed such as a documentary style with CLASSIC CHROME.
The camera supports multiple exposure capture, which allows you to take two frames and combine them for an artistic effect. You can display the first shot on the LCD screen while framing and shooting the second for perfect alignment. Film Simulation effects also apply in this mode.
Condition: Brand new in original manufacturer's packaging
Contents: Camera, Battery, Charger, Shoulder Strap, Metal Strap Clip, Protective Cover, Clip Attaching Tool
Warranty: 1 Year Canadian Manufacturer's Warranty